Brother HE 120 Operation Manual page 99

SE-BrotherE_sgml.book Page 93 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Topstitch around the zipper.
Sew reverse stitches at the end of the zipper
opening and align the zipper teeth with the side
of the presser foot.
Right side of fabric
End of zipper opening
Reverse stitches
Beginning of stitching
Basting stitching
CAUTION
● When sewing, be sure that the needle
does not touch the zipper, otherwise the
needle may bend or break.
When you are about 5 cm (2 inch) from the
end of the zipper, stop the sewing machine
with the needle lowered (in the fabric), and
then raise the presser foot lever.
Remove the basting stitching, open the zipper,
and then continue sewing.
Zipper Insertion 93