Embroidery Step By Step - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 130 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Embroidery step by step

The basic steps for embroidery are as follows.
1 Presser foot attachment
2 Checking the needle
Embroidery unit
3
attachment
4 Bobbin thread setup
5 Fabric preparation
Embroidery frame
6
attachment
7 Pattern selection
8 Checking the layout
9 Embroidery thread setup
130
Attach the embroidery foot "Q".
For details on attaching the embroidery foot, refer to "Attaching the
embroidery foot" (on the next page)
↓
Use a needle matched to the fabric.
For details on replacing the needle, refer to "Replacing the needle" (page
37).
↓
Attach the embroidery unit.
For details on attaching the embroidery unit, refer to "Attaching the
embroidery unit" (page 134).
↓
For the bobbin thread, wind embroidery bobbin thread and set it in
place.
For details on setting up the bobbin thread, refer to "Winding/Installing
the Bobbin" (page 18).
↓
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details on preparing the fabric, refer to "Preparing the fabric" (page
138).
↓
Attach the embroidery frame to the embroidery unit.
For details on attaching the embroidery frame, refer to "Attaching the
embroidery frame" (page 142).
↓
Turn the power on, and select an embroidery pattern.
For details on selecting embroidery patterns, refer to "Selecting
embroidery patterns" (page 144).
↓
Check and adjust the size and position of the embroidery.
For details on ajusting the layout, refer to "Adjusting the layout" (page
154).
↓
Set up embroidery thread according to the pattern.
For details on the thread setup steps, refer to "Upper Threading" (page
23).