Quilting - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 99 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ For a seam allowance on the left side
Align the left side of the presser foot with the
edge of the fabric, and sew using stitch
7 mm (1/4 inch)
Memo
To change the width of the seam allowance
(The needle position), adjust the stitch width.
For details, refer to "Adjusting the stitch
width" (page 56).

Quilting

58
.
Sandwiching batting between the top and bottom
layers of fabric is called "quilting". Quilts can easily
be sewn using the walking foot and the quilting
guide.
Baste the fabric to be quilted.
Remove the presser foot holder.
• For details, refer to "Removing the presser
foot holder" (page 42).
Hook the connecting fork of the walking foot
onto the needle clamp screw.
Connecting fork
Needle clamp screw
Lower the presser foot lever, insert the presser
foot holder screw, and then tighten the screw
with the screwdriver.
Presser foot holder screw
The walking foot is attached.
Appliqué, Patchwork and Quilt Stitching 99