Brother HE 120 Operation Manual page 79

SE-BrotherE_sgml.book Page 73 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Select the stitch type.
The screen containing the various types of
stitches appears.
• To select a different stitch type, press
(Back key).
Press the stitch selection.
(Previous page key) displays the previous
screen, and
next screen.
When a decorative stitch is selected
Automatic reverse/reinforcement stitch
Decorative stitch selection
Set width and length
Automatic thread cutting
Check combined pattern
Delete a selected pattern
Horizontal mirror image
Single stitch sewing
Repeat sewing
• To select a different stitch, press the
remove a selected pattern.
If necessary, specify the setting for automatic
reverse/reinforcement stitching and adjust the
stitch length, etc.
• For details on sewing with each of the utility
stitches, refer to the following pages.
(Next page key) displays the
to
Note
When a stitch is selected, the icon for the
presser foot that should be used appears in
the screen. Check that the correct presser
foot is attached before starting to sew. If the
wrong presser foot is installed, turn off the
sewing machine, attach the correct presser
foot, and then select the desired stitch again.
Memo
For details on adjusting the stitch width and
length, refer to "Adjusting the Stitch Width
and Length" (page 56).
Selecting Stitching 73