Removing The Presser Foot Holder - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 42 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
Removing the presser foot
holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
embroidery foot and quilting foot. Use the
screwdriver to remove the presser foot holder.
Remove the presser foot.
• For details, refer to "Replacing the presser
foot" (page 40).
Use the screwdriver to loosen the presser foot
holder screw.
Screwdriver
Presser foot holder
Presser foot holder screw
■ Attaching the presser foot holder
Align the presser foot holder with the lower-
left side of the presser bar.
42
Hold the presser foot holder in place with your
right hand, and then tighten the screw using
the screwdriver in your left hand.
Screwdriver
Note
If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.