Useful Functions; Automatically Sewing Reverse/Reinforcement Stitches - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 59 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Useful Functions

Functions useful in improving sewing efficiency are described below.
Automatically sewing reverse/
reinforcement stitches
The sewing machine can be set to automatically sew
reverse or reinforcement stitches at the beginning and
end of the stitching.Whether reverse stitches or
reinforcement stitches are sewn depends on the stitch
that is selected. For details, refer to "Stitch Settings"
(page 66).
Turn on the sewing machine.
The LCD comes on.
Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 47).
Press on the LCD.
It turns to
for automatic reverse/reinforcement
stitching.
• To turn automatic reverse/reinforcement
stitching off, press
• When the sewing machine is turned off, the
automatic reverse/reinforcement stitching
setting is cancelled.
, and the sewing machine is set
.
Position the fabric under the presser foot, and
then press (Start/stop button) once.
Start/stop button
After reverse/reinforcement stitches are
sewn, the machine starts sewing.
After reaching the end of the stitching, press
(Reverse/reinforcement stitch button)
once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
Reverse/reinforcement stitch button
After reverse/reinforcement stitches are
sewn, the sewing machine stops.

Useful Functions 59