Entering The Pattern Data - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 124 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES

Entering the pattern data

Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 40).
Press (Menu key) on the operation
panel, and then press
The screen for selecting pattern types is
displayed.
Select .
The screen for entering a pattern appears.
Check the grid sheet set, and specify the
coordinates of the first point.
Specify the coordinates using
press .
124
.
, and
Specify whether single stitching or triple
stitching will be sewn between the points.
is single stitching, and
stitching.
Specify the coordinates of the second point,
and then press .
Repeat steps through to specify each
point.
• If you make a mistake entering a point, press
, and the previous point is erased.
• To correct the content entered, press
You can insert, delete and move points.
After all points have been entered, press
The embroidery screen appears.
gives triple
.
.