Adjusting The Stitch Length - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 57 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
CAUTION
● After adjusting the stitch width, slowly
turn the balance wheel toward you and
check that the needle does not touch the
presser foot. If the needle hits the presser
foot, the needle may bend or break.

Adjusting the stitch length

The stitch length can be adjusted on the LCD.
Turn on the sewing machine.
The LCD comes on.
Select a stitch.
■ For groups other than utility stitches
When selecting stitches in the decorative
stitch, satin stitch, cross-stitch and combined
utility stitch groups, press
the stitch.
A screen containing settings for the selected
stitch appears.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 47).
• Immediately after the stitch is selected, the
standard settings (highlighted) appear.
To make the stitch length shorter, press
To make the stitch length longer, press
The stitch length is changed.
• If the setting is changed, the highlighted
value is erased.
Adjusting the Stitch Width and Length 57
after selecting
.
.