SE-BrotherE_sgml.book Page 14 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
LCD (liquid crystal display) operation
Selected stitch, pattern settings and messages are displayed on the LCD (liquid crystal display) on the front
of the sewing machine.
Viewing the LCD
When the power is turned on, the LCD comes on, and the following screen is displayed.
The LCD display is changed using the
performed by directly touching the LCD.
■ Utility stitch selection screen
Selected stitch
Presser foot to be used
Stitches
Stitch width (mm)
Stitch length (mm)
Automatic reverse/reinforcement
Automatic thread cutting
Horizontal mirror image key
Number of stitches in group
Number of the selected stitch
Increase value
Decrease value
■ Stitch group selection screen
Press
(Menu key) to display the screen for selecting the stitch group. The details are explained in
"Selecting stitching" (page 47).
Memo
A different screen is displayed when the embroidery unit is attached.
Refer to "Error messages" (page 169) for messages displayed on the LCD.
Depending on the model of sewing machine, an animation may be displayed when the power is turned
on. When an animation is displayed, the screen above will be displayed if you touch the LCD with
your finger.
14
keys on the right, and operations