Adjusting The Stitch Width And Length; Adjusting The Stitch Width - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 56 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS

Adjusting the Stitch Width and Length

The stitch width and length can be adjusted. Normally, when a stitch is selected, the appropriate width
and length are automatically selected.

Adjusting the stitch width

The zigzag width can be adjusted on the LCD.
Turn on the sewing machine.
The LCD comes on.
Select a stitch.
■ For groups other than utility stitches
When selecting stitches in the decorative
stitch, satin stitch, cross-stitch and combined
utility stitch groups, press
the stitch.
A screen containing settings for the selected
stitch appears.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 47).
• Immediately after the stitch is selected, the
standard settings (highlighted) appear.
To make the stitch width narrower, press
To make the stitch width wider, press
The stitch width is changed.
56
• If the setting is changed, the highlighted
value is erased.
■ For groups other than utility stitches
When selecting stitches in the decorative
stitch, satin stitch, cross-stitch and combined
after selecting
utility stitch groups, press
the setting.
Memo
To reset the stitch width to its standard
setting, select the same stitch again or
change the setting to the highlighted value.
If the straight stitch (left needle position or
triple stretch stitch) was selected, changing
the stitch width changes the needle position.
.
Increasing the width moves the needle to the
.
right; reducing the width moves the needle
to the left.
The sewing machine can be set so that the
stitch width can easily be changed with the
sewing speed controller. For details, refer to
"Satin stitching" (page 102).
after making
means the setting cannot be adjusted.