Adjusting The Stitch Length And Width - Brother 888-E40 Operation Manual

SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
c Press (stitch selection keys). The
number of the selected stitch is displayed.
Press the "+" or "–" side of
reduce the number by one. Pressing
right changes the digit on the right and pressing
on the left changes the digit on the left.
The stitch is selected.
Memo
● The pattern numbers of the stitches are
displayed on the machine.
d Attach the presser foot indicated in the LCD.
a Presser foot type
• For details, refer to "Replacing the presser
foot" (page 36).
Memo
● The presser foot to be used is indicated by
the letter (J, A, etc.) that appears above or
beside the stitch number.
e
If necessary, adjust the stitch length and
width.
• For details on sewing with each of the stitches,
refer to the following example.
40
Adjusting the stitch length
and width
to increase or
■ [Example] Selecting stitch
on the a
b
c
Press the stitch selection keys to select stitch 05.
With on the right, select "5", and with
on the left, select "0".
Press the "+" or "–" side of
length adjustment key) to increase or reduce
the stitch length.
a Stitch length
b Stitch length adjustment key
c Short
d Long
Press the "+" or "–" side of
adjustment key) to increase or reduce the
stitch width.
a Stitch width
b Stitch width adjustment key
c Narrow
d Wide
Note
● When the stitch length or stitch width is
changed from the standard setting,
around or disappears from the LCD.
When the stitch length or stitch width is
reset back to the standard setting,
reappears around or
.
(stitch
(stitch width
in the LCD.