Chapter 3 Starting To Embroider; Embroidery Step By Step - Brother 888-L01 Operation Manual

3
Chapter

Embroidery Step by Step

Follow the steps below to prepare the machine for embroidery.
Step 3
Step 1, 2
Step # Aim
1 Presser foot attachment
2 Checking the needle
3 Embroidery unit attachment
4 Bobbin thread setup
5 Fabric preparation
6 Embroidery frame attachment
7 Pattern selection
8 Checking the layout
9 Embroidery thread setup
STARTING TO
EMBROIDER
Step 9
Step 4
Step 6
Step 5
Attach embroidery foot "Q".
Use needle 75/11 for embroidery.
Attach the embroidery unit.
For the bobbin thread, wind embroidery bobbin thread and set it in place.
Attach a stabilizer material to the fabric, and hoop it in the embroidery frame.
Attach the embroidery frame to the embroidery unit.
Turn the main power to on, and select an embroidery pattern.
Check and adjust the size and position of the embroidery.
Set up embroidery thread according to the pattern.
Embroidery Step by Step
Step 7, 8
Action
Basic operations B-51
B
Page
B-52
B-30
B-54
B-20
B-58
B-62
B-64
B-65
B-66