Entering The Pattern Data - Brother Sewing Machine Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES

Entering the pattern data

Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
a Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 44).
b Press (Utility stitch key) on the operation
panel, and select
The screen for entering a pattern appears.
c Check the grid sheet set, and specify the
coordinates of the first point.
Specify the coordinates using
press .
d Specify whether single stitching or triple
stitching will be sewn between the points.
is single stitching, and
triple stitching.
140
.
, and
gives
e Specify the coordinates of the second point,
and then press
d
f Repeat steps through
point.
• If you make a mistake entering a point, press
, and the previous point is erased.
• To correct the content entered, press
You can insert, delete and move points.
g After all points have been entered, press
The sewing screen appears.
.
e
to specify each
.
.