Setting The Ip Address With Netspot - Canon N2000 Network Manual

Setting the IP Address with NetSpot

1
Note
2
3
4
2-4
TCP/IP Network Settings (Windows)
Start NetSpot as the system administrator.
When the icon for the printer that you want to set is displayed in NetSpot, the
printer and computer are communicating normally, so the following procedure is
not required. Set the printer protocol directly.
, P.2-9)
Printer"
If the Device window does not open, from the Window menu select
New Window, then select IP Devices.
If the icon for the printer is not displayed, confirm that the printer is
switched on and connected to the network, then from the Device
menu select New.
In the MAC Address box, enter the MAC address, in the IP Address
box enter 192.168.0.215, then click the Continue button.
(
"Setting TCP/IP Protocol for the