When You Cannot Use Netspot - Canon N2000 Network Manual

5
In the Choose Printer Type list box, select Canon Office Color N2000/
1000, and click the OK button.
6
Under TCP/IP select the settings for the Frame Type and the IP
Address text box, then click the Continue button.
• In the Frame Type list box, select Ethernet II.
• In the IP Address text box, enter the IP address assigned to the printer.
7
Check the message and click the Yes button.
The printer icon is displayed for NetSpot.
Note
About 1 minute may be required for the printer icon to display on the screen.
If the printer icon does not appear, refer to "When You Cannot Use NetSpot" (
P.5-2)
The Subnet Mask and Gateway addresses are set to 0.0.0.0.
Setting the Printer IP Address
2-5