Operating Instructions; Control Panel Features - EAS Electric EASYAIR35H Installation And Owner's Manual

Operating Instructions

Control Panel Features

NOTE: The following control panels
purchased may be slightly different according to the models. Your machine may not contain some indicators or
buttons. The actual shape shall prevail.
NOTE: On some models
Indicator Function
Timer on light;
Timer off light;
DRY mode light
FAN mode light
AUTO mode light
COOL mode light
FOLLOW ME light
Heat mode light;
Degrees Celsius
Degrees Fahrenheit
Swing/Wireless(On some models) button
Used to initiate the Auto swing feature. When the
operation is ON, press the SWING button can stop
the louver at the desired angle.
Used to initiate the Wireless function. For the
first time to use Wireless function, press and
hold the swing button for 3 seconds to initiate the
Wireless connection mode. The LED DISPLAY
shows 'AP' to indicate you can set Wireless
connection. If connection(router) is successful
are for explanation purpose only. The control panel of the unit you
基准说明同时展示PD所有全功能显示标贴，如客户有要
求，可根据订单BOM中的实际显示标贴图纸进行替换
is instead of °F. On some models (power light) is instead of
Indicator Function
HIGH fan speed light
MED fan speed light
LOW fan speed light
AUTO fan speed light(all illuminate/all dark)
ION light
SLEEP light
Wireless light
LED display
Power management light
Power light
within 8 minutes, the unit will exit Wireless
connection mode automatically and the Wireless
indicator illuminates. If connection is failure
within 8 minutes, the unit exits Wireless
connection mode automatically. After Wireless
connection is successful, you can press and
hold SWING and DOWN (-) buttons at the same
time for 3 seconds to turn off Wireless function
and the LED DISPLAY shows 'OF' for 3 seconds,
press SWING and UP(+) buttons at the same
V.1 V.1
(WIRELESS light).
 
Page 17