Operating Temperature - EAS Electric EDMV2 Series Instruction Manual

Display panel
Manual
button
MANUAL button: This button selects the mode in the following order: AUTO,
FORCED COOL, OFF.
FORCED COOL mode: In FORCED COOL mode, the Operation light flashes. The
system will then turn to AUTO after it has cooled with a high wind speed for 30
minutes. The remote control will be disabled during this operation.
OFF mode: When the display panel is turned OFF, the unit turns off and the
remote control is re-enabled.

Operating temperature

When your air conditioner is used outside of the following temperature ranges,
certain safety protection features may activate and cause the unit to disable.
Inverter Split Type
Room
17°C - 32°C
Temperature
(62°F - 90°F)
0°C - 50°C
(32°F - 122°F)
Outdoor
Temperature
0°C - 52°C
(32°F - 126°F)
(For special
tropical
models)
Timer
indicator
Operation
indicator
PRE-DEF
(pre-heating/defrost) indicator
COOL mode HEAT mode
0°C - 30°C
(32°F - 86°F)
-15°C - 50°C
-15°C - 24°
(5°F - 122°F)
C (5°F -
(For models
75°F)
with low
temp. cooling
systems.)
Infrared
receiver
LED display
Alarm
indicator
DRY mode
10°C - 32°C
(50°F - 90°F)
0°C - 50°C
(32°F - 122°F)
0°C - 52°C
(32°F - 126°F)
(For special
tropical
models)
8
FOR OUTDOOR UNITS
WITH AUXILIARY
ELECTRIC HEATER
When outside
temperature is
below 0°C (32°F ),
we strongly
recommend
keeping the unit
plugged in at all
time to ensure
smooth ongoing
performance.
V.2