How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation; Dehumidifying Operation - EAS Electric EASYAIR35H Installation And Owner's Manual

How to use the buttons

SET TEMPERATURE( C)
AUTO FAN
COOL HIGH
MED
DRY Ensure the unit is plugged in and power is
HEAT LOW
available. The OPERATION indicator on the
TEMP
display panel of the indoor unit illuminates.
1. Press the MODE button to select Auto.
2
3
2. Press the TEMP button to set the desired
ON/OFF
MODE
FAN SPEED
1
temperature. The temperature can be set
SWING ECONOMY TIMER ON
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
increments.
TIMER OFF
RESET LOCK
3. Press the ON/OFFbutton to start the air
LED
DISPLAY
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
actual ambient room temperature and the set temper-
ature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
SET TEMPERATURE( C) Cooling /Heating/Fan operation
FAN
AUTO
COOL HIGH
Ensure the unit is plugged in and power is
MED
DRY
available.
HEAT LOW
1. Press the MODE button to select COOL, HEAT,
TEMP
(cooling & heating models only) or FAN mode.
2 2. Press the TEMP button to set the desired
4
MODE ON/OFF
FAN SPEED
temperature. The temperature can be set
1
3
within a range of
SWING ECONOMY TIMER ON
increments.
TIMER OFF
3. Press the FAN SPEED button to select the
RESET LOCK
fan speed in four steps- Auto, Low, Med,or High.
LED
DISPLAY
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.

Auto operation

17 C(62 F)~ 30 C in 1 C(2 F)
7 7
SET TEMPERATURE( C)
AUTO FAN
COOL HIGH
DRY MED
LOW
HEAT
TEMP
2
MODE ON/OFF
FAN SPEED
1
SWING TIMER ON
ECONOMY
TIMER OFF
RESET LOCK
LED
DISPLAY
SET TEMPERATURE( C)
AUTO FAN
COOL HIGH
DRY MED
HEAT LOW
TEMP
ON/OFF
MODE
FAN SPEED
SWING TIMER ON
ECONOMY
1
TIMER OFF
RESET LOCK
LED
DISPLAY
V.1

Dehumidifying operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the MODE button to select DRY mode.
2. Press the TEMP button to set the desired
temperature. The temperature can be set
3
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not switch
the fan speed. It has already been automatically
controlled.
Swing operation(on some models)
Use the SWING button to adjust the Up/Down
airflow direction .
1. When press the button once and quickly, the
air flow direction setting feature of the louver is
activated. The moving angle of the louver is
o
6 for each press. Keep pressing the button to
move the louver to the desired position.
NOTE:On some models press it to initiate the Auto
swing feature only.
2. If keep pressing the SWING button without
releasing for 2 more seconds, the auto swing
feature of the louver is activated. The horizontal
louver would swing up/down automatically.
Press it again to stop.
NOTE: When the louver swing or move to a
position which would affect the cooling
and heating effect of the air conditioner,
it would automatically change the swing/
moving direction.
8 8