Installation Locations; Installation Notes - Miele PWM 908 Operating And Installation Instructions

Installation

Installation locations

Side view
714
1100
Washer-dryer stack
min. 300
The washing machine can be installed
as a washer-dryer stack together with a
Miele tumble dryer. A WTV stacking kit
(optional accessory) is required for this.
72
1132
1702
Installation on a plinth
The washing machine can be installed
on a steel plinth (open or closed, avail-
able as an optional Miele accessory) or
on a concrete plinth.

Injury can occur if the washing
machine has not been adequately
secured.
When installing the machine on a
plinth, there is the danger of the
washing machine falling off the plinth
during spinning.
Secure the washing machine using
the clamps supplied.

Installation notes

This washing machine is not suitable
for building under.

Risk of damage due to moisture
ingress.
Moisture can damage electrical com-
ponents.
Do not install the machine near or
directly above an open gully or floor
drain.
The washing machine must not be
connected to devices such as timers
which would switch it off automatic-
ally.