Advertisement
4. Connect the cable to the connector on the LED board.
5. Using the two screws you removed in step 1, secure the new board to
C
OMPLETE THE
Follow these steps to complete the procedure.
1. Reassemble the library by following the steps in
2. Power on the library by following the steps in
3. Restart any backup processes that you stopped for this procedure.
4. Dispose of the used component is a responsible manner.
8
Front Panel LED Board Replacement
This view—looking at the back side of the interior
cover panel—shows the LED board unscrewed from its
mounting plate and tilted out with the cable connected.
Mounting orientation
Connector
Figure 5 LED board installation (close up interior view).
its mounting plate.
P
ROCEDURE
on page 5
in reverse order.
on page 4
in reverse order.
Mounting holes
Mounting plate
LED board
(tilted out)
Cable connector
Screw (2x)
Mounting
holes
Access the LED board
Powering Off the Library
90950014
Advertisement
