Advertisement
4. Carefully tilt the top of the interior cover panel outward.
R
LED B
EPLACE THE
Follow these steps to replace the LED board.
1. Using a #1 Phillips screwdriver, remove the two screws securing the
2. Disconnect the connector and set the board aside for disposal.
3. Unpack the replacement board.
July 2009
Note: The cover panel rests on the
extended E/E port.
Thumb
screws
Figure 4 Interior cover panel orientation.
OARD
board to the mounting plate and set them aside.
Replace the LED Board
Carefully tilt the
panel outward.
LED board is
located here.
Spectra T120 Library
7
Advertisement
