Advertisement
Side Extension Panel 069-5796 and 000SEPKIT
2.1 Disassemble the SeP
1.
Pull the ring to release the latch while firmly pulling
the support arm assembly up to unlock and remove the
support arm assembly (Figure 9).
2.
Repeat step 1 with the second support arm assembly.
3.
Loosen and remove the four threaded knobs on the
SEP (Figure 10).
4.
Remove both brackets with tubes attached on the SEP
(Figure 11).
© Ferno-Washington, Inc 234-3488-00 April 2012
2 - DiSinfect the SeP
Figure 9 - Remove the Support Arm Assembly
Figure 10 - Remove the Knobs on the SEP
Figure 11 - Remove Brackets and Tubes From the SEP
5
Advertisement
