Ferno Kwik Klip 031-4002 Quick Start Manual

Description
Accessory Kit 031-4002 contains one Kwik Klip
Restraint System designed to secure a patient on the
Model 59 or Model 59-T EZ Glide Evacuation Chair.
Continuous left and right straps attach to the top of the
chair's back frame, crisscross the patient's chest, anchor
to a connector strap at each side of the chair seat, then
buckle across the patient's lap (see Components, below).
Buckles are color coded.
Important
The Kwik Klip™ is a secondary restraint and is
not designed for use on cots or in any other
situation requiring primary restraints.
WARNING
!
Improper use of the restraints can cause
injury. Use the restraints only for the
purpose described in this manual.
Components
Shoulder Area
of Straps
Looped End
of Strap
(2)
Tan-Colored Side
Buckle
(2)
Connector
Strap (2)
(with Black Dual-Adjust Buckle)
© Ferno-Washington, Inc. 234-3322-00 June 2005
Kwik Klip
Models 59 and 59-T EZ Glide Evacuation Chair
™
Length-Adjustment
Slide
(2)
Lap Area of Restraint
Accessory Kit 031-4002
Patient Restraint System for
™
General Specifications
Patient
Load Limit for System ........................... 500 lb/227 kg
Webbing ......................................... 2 in. Polypropylene
Buckle Style ............................................Side-Release
Buckle Material ................................................. Acetal
500 lb
227 kg
Safety Information
Boxes with Warning headings (see below) indicate a
potentially hazardous situation which, if not avoided, could
result in injury or death.
Boxes with Important headings (see below) contain
important product or usage information.
Before Placing the Restraints
In Service
1. Personnel who will work with the restraints need to
read this manual and practice using the restraints.
2. Confirm that restraints operate properly. Follow
instructions in Inspecting the Restraints, page 4.
Improper operation of the restraints can
cause injury. Operate the restraints only as
described in this manual.
LOAD LIMIT
Inspect the restraint system if the
load limit has been exceeded
(see Inspecting the
Restraints, page 4).
WARNING
!
Important
WARNING
!
1