Automatically Forwarding Received Faxes - Canon MultiPASS F60 Software User's Manual

If you set the printer to save a fax in memory, it can later be printed or
sent to the My MultiPASS Received Faxes folder when your
computer is turned on. When a fax is saved in printer memory, a
notification message appears on the printer LCD display, indicating
the fax is received in a file.
To move received faxes from printer memory to My MultiPASS:
1. Turn on your computer and start Windows.
2. Open My MultiPASS.
In Device Setup, on the Receive Fax tab, the When Computer is Off option
must be set to Save in Memory and the When Computer is On option must
be set to Send to PC. See the "Defining Device Fax Settings" section. (P.
147)

Automatically Forwarding Received Faxes

If you are going to be away from your computer for a long period of time,
you can have faxes automatically forwarded to you at a remote location.
You specify the specific fax number to which all faxes are forwarded.
Faxes are forwarded to you for as long as the Auto Forward setting is
enabled.
When you automatically forward faxes, color faxes are forwarded as
black and white documents.
The following requirements must be met for the Auto Forward feature to
work correctly:
The PC must be on. Standby or Sleep mode must be inactive.
The power to the printer is on and the device is connected to the
computer with a USB cable.
In the Device Setup, on the Receive Fax tab, the When Computer Is
On option must be set to Send to PC.
Chapter 4 PC Faxing (F80 only) 75
0