Setting The Default Printer; Sharing The Printer Installation - Canon MultiPASS F60 Software User's Manual

If you are installing over a network, click Install from a list or specific
location and specify the following files and folders.
When the installation is finished, restart your PC before using the
MultiPASS Suite software. If your PC does not restart automatically,
restart it manually.

Setting the Default Printer

When you install the software, the system automatically sets the printer
as the default printer. If necessary, however, follow these instructions to
set the default printer.
To set the default printer:
1. On the Windows desktop, click Start.
2. On the Start menu, point to Settings and then click Printers
(in Windows XP, click Printers and Faxes on the Start menu).
3. In the Printers window (in Windows XP, the Printers and Faxes
window), click the printer icon.
4. On the File menu, click Set As Default (Windows 98/Me) or Set as
Default Printer (Windows 2000/XP).

Sharing the Printer Installation

You may be using your computer and the printer connected to your
computer in an environment where multiple computers are connected by
a network. In this case, you can share the use of your printer with the
other computers on the network.
If you choose to share the use of your printer, your computer acts as the
host system or server to the other computers (also referred to as remote or
client systems).
Chapter 2
MultiPASS/USBDrv/Win2KXP/mp42uNT.INF
Installing and Getting Started 15