Canon MultiPASS F60 Software User's Manual page 22

After you set up your printer for sharing, the client systems must install
the printer driver onto their systems. They can do so directly from your
system. Based on which Windows operating system you are using, the
following client system can share your printer:
If your system (server) is:
Windows 98/Me
Windows 2000/XP
When a document is printed by the client system to a shared printer, any
printing messages (status or error messages) display on the server
system.
To set up the printer for sharing:
1. On the MultiPASS server system, on the Windows desktop, click
Start.
2. On the Start menu, point to Settings and then click Printers
(in Windows XP, click Printers and Faxes on the Start menu).
3. In the Printers window (in Windows XP, the Printers and Faxes
window), click the MultiPASS printer icon.
4. On the File menu, click Sharing.
If the Sharing command is not available, you need to set up printer
sharing in Windows. For details, see your Windows user
documentation.
5. In the Properties dialog box, on the Sharing tab, click Shared, Shared
As, or Share this printer.
6. In the Share Name box (Windows 98/Me/XP) or Shared As box
(Windows 2000), type a name you want to assign to the shared
printer.
If available, you may also want to assign a password, which would
then be required by the client system when using the printer.
16 Installing and Getting Started
Install on client system:
Windows 98/Me
Windows 98/Me or Windows 2000/XP
Chapter 2