Installing The Multipass Suite - Canon MultiPASS F60 Software User's Manual

MultiPASS Toolbar
Enables you to scan an image directly to a destination, such as a
desired application (for example your e-mail application or a graphic
application).
If you are using Windows 2000/XP, MPService (MultiPASS Service) is
automatically created and must be running for jobs to be processed with
the MultiPASS Suite and the printer. MPService starts automatically
when you start your computer, even if you have not yet logged into
Windows. If you log off Windows and leave the computer on, MPService
continues to run, to process any MultiPASS jobs.

Installing the MultiPASS Suite

The MultiPASS Suite installation program installs all the appropriate
software components on your local hard drive. The MultiPASS Suite
should not be installed on a network drive.
MultiPASS Suite 4.1 or earlier must be removed from your PC before
installing MultiPASS Suite 4.2.
To install the MultiPASS Suite software if you are using Windows 2000/
XP, you must log on as Administrator or have Administrator privileges.
If the MultiPASS Suite has been copied on a local or network drive, you
can install the software on your system from that drive, rather than using
the installation disk.
If you are using Windows 98/Me/2000:
See "A) To install the MultiPASS Suite (Windows 98/Me/2000):" for
instructions for installing the MultiPASS Suite.
If you are using Windows XP:
8 Installing and Getting Started Chapter 2