Canon MultiPASS F60 Software User's Manual page 122

•
•
•
•
116 Scanning
Image File
On the Save As tab, click Browse to select a location (drive and
folder) where you want your image files to be saved. The factory-
predefined setting is the My Pictures folder in My Documents.
When MultiPASS Suite is installed and there is no My Pictures
folder, images will be saved to the My Documents folder. If there
is no My Documents folder either, the images are set up to be
saved to the Scan to Save folder.
Filename and Numbering
On the Save As tab, in the Filename box, enter the base file name
you want to use to define your own preference for naming files.
For Numbering, click whether you want to continue numbering
from the previously saved file, or to begin the numbering from
the specified number.
MultiPASS uses a naming rule for automatically assigning file
names to scanned images that are saved as files. This rule
includes a base file name plus a sequential number.
For example, if you enter SavedScan as the base file name, and
you specify the numbering to start at 100, your subsequent image
files would be named: SavedScan100, SavedScan101, and so on.
Save as Type
If available, click the file format in which you want your scanned
image saved, such as BMP or TIF. This option is available only for
those scan destinations where saving the image file is
appropriate.
Image Type
If available, click the type of image you are scanning, such as
Black and White.
Chapter 5