Using The Multipass Status Monitor - Canon MultiPASS F60 Software User's Manual

Using the MultiPASS Status Monitor

You can use the Status Monitor to review the current status of the printer
and any error conditions needing your attention. You cannot interrupt
MultiPASS activity with the Status Monitor.
When the Status Monitor is open, it displays as a window on the
Windows desktop and an icon in the Windows taskbar.
Status Monitor
window
To open the Status Monitor, if currently closed:
On the Windows desktop, click Start, point to Programs or All Programs,
point to MultiPASS Suite, and then click MultiPASS Status Monitor.
To display the Status Monitor menu:
Right-click the Status Monitor window or icon.
To display the Status Monitor window:
If the Status Monitor appears only as an icon on the taskbar, click Restore
on the Status Monitor menu.
To specify the Status Monitor window as the top window:
Click Always On Top on the Status Monitor menu.
To display the port on which the printer is connected:
Click Device Information on the Status Monitor menu.
To minimize the Status Monitor window:
If the Status Monitor window currently appears, and you prefer to
display only the icon on the taskbar, click Minimize on the Status Monitor
menu or click the Minimize button on the title bar.
To set the Status Monitor to open when you start Windows:
Click Load on Windows Startup on the Status Monitor menu.
160 Fine-tuning the MultiPASS Suite
6
Chapter 7