October 2000
Intermediate
SCSI cable
NTRH1408
SCSI cable
NTRH1410
Note: The backplane connectors for the right slot are not required, and,
therefore, are left vacant.
6
Thread the NTRH1410 cable through the shelves below and out through the
bottom of the Meridian 1 tower.
7
Replace the protective plate.
8
Replace the I/O panel cover.
9
Power up the shelf.
What's next?
Prepare the modem and SCSI devices for connection to the 201i server. See page 87.
Part 2: 201i Server Hardware Installation
Installing the server and connecting the peripherals
Remove
this
cover
Cable
routed
from
front
G101551
63