Avoiding Electrostatic Discharge - Nortel CallPilot Installation And Configuration Manual
Hide thumbs
Also See for CallPilot:
- Install manual (286 pages) ,
- Administrator's manual (250 pages) ,
- User manual (182 pages)
Table of Contents
Advertisement
October 2000
Avoiding electrostatic discharge
Introduction
Electrostatic discharge (ESD) can seriously damage component parts, such as
boards, disk drives, and other parts.
ATTENTION
Antistatic wrist strap
If an ESD workstation is not available, provide some ESD protection by wearing an
antistatic wrist strap. Ground the ESD wrist strap by attaching it to any unpainted
metal surface on the switch.
This diagram shows the lead from the ESD wrist strap clipped to an exposed screw
on a chassis.
To discharge static
When working with server components, periodically touch a nearby unpainted metal
surface to discharge any accumulated static.
Part 2: 201i Server Hardware Installation
Nortel Networks recommends performing all hardware
installation and maintenance procedures at an ESD workstation
whenever possible.
Safe handling of CallPilot components
G100733
21
Advertisement
Table of Contents
