Nortel CallPilot Installation And Configuration Manual page 109

October 2000
To connect the CD-ROM and tape drives to the 201i server
(Option 11C Mini)
1 Connect the first SCSI device as follows:
IF the first device is the THEN
CD-ROM drive
tape drive
2 Connect an additional device in a daisy chain if required, using either the SCSI
cable supplied with the device or an NTRH3502 cable.
The following diagram shows cable connections, where the CD-ROM drive is
the first device:
201i cabling
Option 11C Mini
201i
NTRH30AA
CD-ROM drive SCSI
cable NTRH3502
3 Connect the power cord for each device.
4 Power up the devices.
What's next?
Connect the 201i server to the ELAN and CLAN. See page 110.
Part 2: 201i Server Hardware Installation
Installing the server and connecting the peripherals
do the following:
a Attach the A0769312 SCSI adapter to the
CD-ROM drive.
b Connect the NTRH3502 SCSI cable you
installed earlier on the Option 11C Mini to the
SCSI adapter on the CD-ROM drive.
connect the NTRH3502 SCSI cable you installed
earlier on the Option 11C Mini to the tape drive.
Peripheral cabling
Optional
NTRH9038
Tape drive
Tape drive SCSI cable
NTRH3502
NTRH9037
CD-ROM
drive
SCSI
adapter
G101595
109