Table of Contents
Advertisement
Getting started
Site inspection checklist
Site inspection checklist
Introduction
Standard 1.0
Before you get started, you need to ensure that the following
items have been checked. Use this checklist to inspect the site
for the 1001t Server installation.
Check Description
Area clean and clear of any debris
Adequate space for all equipment
Desk, shelf, or table space available for server
SVGA monitor, keyboard, mouse, and modem
Room around equipment for adequate air flow for
ventilation
No heat sources near equipment
Adequate space for access to front, side, and rear
panels of server
Area isolated from strong electromagnetic fields
and electrical noise sources (air conditioners, large
fans, motors, radio or TV transmitters, or high-
frequency security devices)
Adequate grounded electrical outlets or power
bars for all equipment. There should be one outlet
for each of the following:
• 1001t Server power supplies (3)
• monitor
• modem power cord
• ELAN hub power cord
• PC client and monitor
(Optional) Customer-supplied UPS for the server
Nortel Symposium Call Center Server
1001t Hardware Installation Guide
1-13
May 1998
Advertisement
Table of Contents
