Installing hardware
Connecting peripherals to the 1001t Server
Connecting peripherals to the 1001t Server
Purpose
Tip
Rear panel
Standard 1.0
Follow this procedure to connect Nortel-supplied peripherals to
the 1001t Server.
A legend is located adjacent to the peripheral connector panel at
the back of the server. It shows the symbol for each peripheral
and which connector it uses.
The following illustration shows the server connections for the
power cords, peripherals, and cables. The legend follows the
illustration.
Nortel Symposium Call Center Server
1001t Hardware Installation Guide
2-21
May 1998