Table of Contents
Advertisement
2-28
Overview of installing the ELAN
Introduction
Hub specification
Standard 1.0
This section contains instructions for setting up the embedded
LAN (ELAN) used for Nortel equipment.
The ELAN hub is customer-supplied equipment defined in the
Nortel distributor information package.
The main features required are as follows.
Feature
Data propagation
Link test
Polarity reversal
Number of jacks
Nortel Symposium Call Center Server
1001t Hardware Installation Guide
Overview of installing the ELAN
Specification
750 nsec
Link test function as specified in the
10BaseT standard
Polarity is corrected automatically if the
waveform is reversed by a wiring error.
Minimum 6 RJ45 jacks
Installing hardware
May 1998
Advertisement
Table of Contents
