Cleaning Your Machine; Cleaning The Exterior; Cleaning The Interior; Cleaning The Scanning Area - Canon MultiPASS F60 Basic Manual

Chapter
10

Cleaning your machine

This section describes the necessary cleaning procedures for your machine.
CAUTION
• Be sure to turn off the power and disconnect the power cord before cleaning the machine.
• Fax Model Print any documents stored in memory before disconnecting the power cord, since
documents in memory are erased when the power is disconnected (
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges. Use a soft cloth to avoid scratching the components.
• Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to
clean the interior of the machine; these can damage the machine's components.

Cleaning the exterior

Wipe the machine's exterior with a clean, soft, lint-free cloth moistened with water or diluted
dishwashing liquid.

Cleaning the interior

Cleaning the scanning area

Wipe the platen glass A, white area B, and
transparent sheet C with a clean, soft,
Fax Model
lint-free cloth moistened with water, then
wipe with a clean, soft, dry, lint-free cloth.

Cleaning inside the scanning unit

To prevent ink spots and paper dust from accumulating inside the machine and affecting
print quality, clean the machine's print area periodically.
Follow this procedure to clean inside the scanning unit:
1
Turn off the power and disconnect the
power cord from the wall outlet.
Chapter 10
Maintenance
Comprehensive Guide).
C B A
Maintenance
10
10-1