12: Machine Settings; Fax Model; Printing A List To Check The Current Settings; Accessing The Machine Settings - Canon MultiPASS F60 Basic Manual

Chapter
12

Printing a list to check the current settings

Before changing any settings, you can print the USER'S DATA LIST to check the current
settings of your machine. For details, see the

Accessing the machine settings

Follow this procedure to change a setting:
1
Refer to the lists on the following pages to find the setting you want to change.
2
If there is a reference for the
q, refer to that page or
setting
guide for details. If not, at the top
of the list, note under which
function key w and menu e the
setting is located.
3
Press [Copy], [Scan], [Photo Print],
or [Fax] depending under

Fax Model

which function key w the setting is
located.
4
Press [Menu].
5
Use [2] or [3] to select the menu e under which the setting is located.
6
Press [Set].
• You have now accessed the settings in the list.
7
Use [2] or [3] to select the setting you want.
8
Press [Set].
9
Follow these guidelines to scroll through and register settings:
• Use [2] or [3] to scroll through settings.
• To register a setting or access sub-settings, press [Set].
• To return to a previous level, press [Menu].
10
When you have finished, press [Stop/Reset].
Chapter 12
Machine settings
Comprehensive Guide.
Example:
e
Menu: SPECIAL COPY
Function key: [Copy]
For details on how to access the settings below, see p.
Name Description
1. 2 on 1 Copies two pages on one page (letter- or A4-size only).
Copies without any borders (letter, A4-, or 4" × 6"-size
2. BORDERLESS COPY
only).
3. IMAGE REPEAT Prints multiple copies of an image on a single sheet.
AUTO Automatically selects the number of repetitions.
MANUAL Manually select the number or repetitions.
VERTICAL Select the number of vertical repetitions.
HORIZONTAL Select the number of horizontal repetitions.
4. MIRROR IMAGE Prints a mirror image of the original.
5. ENTIRE IMAGE Prints the original image to fit the selected paper size.
Machine settings
w q
Setting Details
— CG
— CG
— CG
—
1/2/3/4
1/2/3/4
— CG
— CG
12-1
12