Loading Documents; Using The Platen Glass; Fax Model; Using The Adf - Canon MultiPASS F60 Basic Manual

Loading documents

You can load your document on the platen glass or
on the type of document and the machine you are using (

Using the platen glass

NOTE
• Load legal-size documents in the ADF.

Fax Model

1
Lift the document cover.
2
Place your document face down on the
platen glass. Align the upper left corner
of your document with the alignment
mark on the upper left corner of the
platen glass.
3
Gently lower the document cover.

Using the ADF

Fax Model
NOTE
• For clearer scans, use the platen glass.
1
Check first to make sure there is no
document on the platen glass.
2
Insert the top of your document, face up,
into the ADF until you hear a beep
adjust the document guides to the width
of the document w.

Print media

Recommended print media and requirements

The following print media is recommended for use with your machine. Please be sure to follow
the guidelines and meet the requirements when loading print media in the multi-purpose tray.
Plain Paper
Size: Letter (8.5 × 11 in./215.9 × 279.4 mm)
Legal (8.5 × 14 in./215.9 × 355.6 mm)
A4 (8.27 × 11.69 in./210 × 297 mm)
Weight: 17–28 lb. (64–105 g/m
Quantity: Approx. 100 sheets (20 lb. or 75 g/m
Paper thickness lever position: Left
Use for: All functions
2-2
Documents and print media
q. Then
2 )
2 ) or maximum stack height of 0.4 in. (10 mm)
ADF. Where you load it depends
Fax Model
p. 2-1).
w
q
Chapter 2