Using Speed Dialing - Canon MultiPASS F60 Basic Manual

8
Use the numeric keys to enter the fax/telephone number you want to
register (max. 120 digits, including spaces and pauses).
• For details on how to enter or delete numbers, see p. 8-1.
9
Press [Set] twice.
N A M E
10
Use the numeric keys to enter a name for the coded speed dialing
code (max. 16 characters, including spaces).
• For details on how to enter or delete characters, see p. 8-1.
11
Press [Set].
12
To continue registering coded speed dialing codes, repeat the
procedure from step 6.
-or-
Press [Stop/Reset] to return to standby mode.
NOTE
• For a list of the recipients you have registered, print the coded speed dialing list (
Guide).
To change or delete an entry: Refer to the Comprehensive Guide.

Using speed dialing

Follow this procedure to dial speed dialing number:
One-touch speed dialing:
Coded speed dialing:
If you use speed dialing to send a fax, press [Start] after dialing, or wait a few seconds for the
machine to automatically begin scanning your document for sending. If you do not want the
machine to begin scanning automatically, disable the <TIME OUT> setting (
8-6
Faxing with your machine—Basic operation
: A
_
1 2 3
4 5 6
7 8 9
0 #
1 2 3
4 5 6
7 8 9
0 #
2
Use the numeric keys to enter the two-digit code
assigned to the number you want to dial (00 to 99).
1
Press the one-touch speed dialing
key assigned to the number you
want to dial (01 to 10).
01 02 03 04
05 06 07 08
09 10
1
Press [Coded Dial].
01 02 03 04
05 06 07 08
09 10
Comprehensive
p. 12-4).
Chapter 8