Canceling Receiving; More Information - Canon MultiPASS F60 Basic Manual

3
When the telephone rings, pick up the handset.
4
• If you hear a person's voice:
Start your conversation. If the caller wants to send a fax after talking
to you, ask them to press the start key on their machine. When you
hear a slow beep tone, press [Start] on your machine to begin
receiving the fax. Hang up the handset.
• If you hear a slow beep tone or silence:
Someone is trying to send you a fax. If your telephone is close to
your machine, press [Start] on the machine to begin receiving the
fax. Hang up the handset. If you are far from your machine, dial 25
(the remote receiving ID) on your telephone and hang up.
NOTE
• You can customize remote receiving by enabling/disabling it, or by changing the remote receiving ID
( <REMOTE RX>, p. 12-5).
• If you have an answering machine connected to your machine that can carry out remote-control
operations (controlling your answering machine from a remote telephone), the security code for this
function may be the same as the remote receiving ID. If so, make sure you change the machine's
remote receiving ID to make it distinct from the answering machine's security code (
ID>, p. 12-5).

Canceling receiving

Press [Stop/Reset] and follow any instructions in the LCD.

More information

For detailed information on all faxing features that can be performed directly from your
machine, refer to the Comprehensive Guide.
8-8
Faxing with your machine—Basic operation
<REMOTE RX
Chapter 8