2
Display the Receive mode settings screen.
(1) Use [
] or [
3
Select a receive mode.
(1) Use [
] or [
Note
For details on the receive modes, see
The receive mode will be displayed on the LCD.
Canceling Receiving
Press [Stop/Reset] and follow any instructions on the LCD.
Memory Receiving
If ink has run low while receiving a fax, if the paper size setting is incorrect, or if the paper type is
set to a type other than plain paper, the fax is automatically stored in memory and <Received in
memory.> is displayed. When the ink tank is replaced or the paper size/type setting is corrected,
the stored fax is printed automatically.
Note
The machine can store up to approximately 250 pages* of faxes in memory.
If the memory becomes full, the machine cannot receive any more faxes. Print or delete
the documents stored in memory, and then contact the sender and have him/her resend
them.
* When using ITU-T No.1 chart (Standard mode)
122
Faxing
] to select <Receive mode settings>, then press [OK].
(1)
] to select a receive mode, then press [OK].
"Receive Modes" on page
119.
Chapter 5