Table of Contents
Advertisement
Transporting the MultiPASS C70
Whenever you plan to transport the MultiPASS C70, you need to
prepare it so it will not be damaged during the move.
1. DO NOT remove the BJ cartridge from the unit.
2. Make sure the cartridge holder is in its home position on the right
3. With the cartridge holder on the right side of the unit, tape the BJ
4. Disconnect the power cord.
5. Disconnect the handset or telephone. Disconnect the extension
6. Remove the document tray. Then, remove the extension from the
7. Remove the document support. (1 p. 2-12)
8. Remove the handset, handset cradle, and cradle support from the
9. Replace all tapes and shipping materials you removed when you
10. Pack the MultiPASS C70 and all its components into its original
12-32
Maintenance
side of the unit.
If it is not in its home position, press the C button (inside the
unit).
cartridge and cartridge holder to the side of the unit.
phone, answering machine, or modem (if using them). Then
disconnect the telephone line and the parallel cable to the PC.
document tray. (1 p. 2-13)
MultiPASS C70. (1 Appendix B, Handset)
first unpacked the MultiPASS C70. (1 p. 2-9)
shipping carton. Use the illustration on page 2-6 for reference.
Chapter 12
Advertisement
Table of Contents
