Securing A Group I (9-18 Kg) Child; Securing A Group Ii-Iii (15-36 Kg) Child - KIDDY Guardianfix 3 Directions For Use Manual

EN
universal: If you would like to use the child seat without k-fix+ fasten-
!
ing, you must rotate the k-fix
the seat (I)!
7.1 Securing a Group I (9–18 kg) child
Position your kiddy on the vehicle seat as described in point 5.1+5.2 or 5.1+5.3.
If you would like to use it in semi-universal mode (fastened with k-fix
ing the instructions under point 6.
Check whether your child seat has been correctly adjusted according to your
child's size and/or body weight (point 4).
The kiddy guardianfix 3 is secured with the 3-point vehicle seat belt on the im-
pact shield belt guides (M) (Fig. 18).
Your kiddy guardianfix 3 may only be used for Group I with the
!
appropriate impact shield (L). The seat cushion (J) must also be
used for children weighing up to 11 kg.
Place your child in the seat, making sure that your child's is positioned all the
way against the back rest (C).
Slide the impact shield (L) with impact shield arms (N) under the arm rests (D)
(Fig. 19).
Slide the impact shield (L) in until it reaches you child's torso.
Depending on the angle of the back rest or the size of the child, the impact
shield may already be up against your child's torso without the impact shield
arms (N) being positioned under the arm rests. This has no bearing on the cor-
rect function and safety of the child seat (Fig. 20).
Then pull the 3-point vehicle seat belt out until it can reach around your kiddy
child restraint system and engage directly into the vehicle seat belt latch (Fig. 21).
+
connectors (E) and retract them into
+
), follow-
30
While doing so, ensure that the seat belt tongue engages with an audible 'click' .
Then thread the lap belt into the impact shield guides (M).
Then tighten the lap belt (Fig. 22). In the process, the impact shield must rest
against your child's torso.
Then thread the shoulder belt into the impact shield guides (M) (Fig. 23).
Ensure that the belt lies flatly and is not twisted.
Tighten the shoulder strap (Fig. 24).
Before driving, ensure that the lap and shoulder belts are correctly positioned
on the impact shield (L), are seated tightly, and are not twisted. The belts must
lie flat over the belt guide area of the impact shield (Fig. 23+24). Check the belt
run regularly.
7.2 Securing a Group II–III (15-36 kg) child
Use without impact shield (L) is only permitted for children
!
weighing at least 15 kg (and/or approximately 4 years of age).
However, we recommend using the impact shield (L) for chil-
dren weighing up to 18 kg.
Always remove the seat cushion (J) for use without impact
!
shield (L).
Position your kiddy on the vehicle seat as described in point 5.1+5.2 or 5.1+5.3.
If you would like to use it in semi-universal mode (fastened with k-fix
ing the instructions under point 6.
Position your child and ensure that your kiddy child restrain5 system is appropri-
ately adjusted for your child's size (point 4).
EN
+
), follow-
31