Securing A Group I (9-18 Kg) Child - KIDDY Guardianfix 3 Instruction Manual

EN
universal: If you would like to use the child seat without k-fix+ fastening,
!
you must rotate the k-fix
seat (I)!
7.1 Securing a Group I (9–18 kg) child
Position your KIDDY on the vehicle seat as described in point 5.1+5.2 or 5.1+5.3.
If you would like to use it in semi-universal mode (fastened with k-fix
the instructions under point 6.
Check whether your child seat has been correctly adjusted according to your
child's size and/or body weight (point 4).
The Guardianfix 3 is secured with the 3-point vehicle seat belt on the impact
shield belt guides (M) (Fig. 18).
Your Guardianfix 3 may only be used for Group I with the
!
appropriate impact shield (L). The seat cushion (J) must also be
used for children weighing up to 11 kg.
Place your child in the seat, making sure that your child's is positioned all the
way against the back rest (C).
Slide the impact shield (L) with impact shield arms (N) under the arm rests (D)
(Fig. 19).
Slide the impact shield (L) in until it reaches you child's torso.
Depending on the angle of the back rest or the size of the child, the impact
shield may already be up against your child's torso without the impact shield
arms (N) being positioned under the arm rests. This has no bearing on the
correct function and safety of the child seat (Fig. 20).
Then pull the 3-point vehicle seat belt out until it can reach around your KIDDY
+
connectors (E) and retract them into the
28
+
), following