Securing The Child - KIDDY Cruiserfix 3 Instruction Manual

EN
In order to secure you child in the seat fastened with k-fix
described under point 7.

7 Securing the child

semi-universal: If you would like to use the child seat with k-fix
!
fastening, ensure that it is fastened to the vehicle as described in point 6!
universal: If you would like to use the child seat without k-fix+ fastening,
!
you must rotate the k-fix
seat (I)!
Position your KIDDY on the vehicle seat as described in point 5.1+5.2 or 5.1+5.3.
If you would like to use it in semi-universal mode (fastened with k-fix
the instructions under point 6.
Position your child and ensure that your KIDDY child restrain5 system is appro-
priately adjusted for your child's size (point 4).
In order to secure your child with the 3[point vehicle seat belt, proceed as follows:
Pull the vehicle seat belt out and place the lap belt under the two armrests (D)
of the seat (I) (Fig. 13). Ensure that the lap belt is in the lowest possible position.
Now close the belt latch. Check whether the belt latch has engaged correctly
(Fig. 13).
Tighten the lap belt and place the diagonal belt under the arm rest (D) on the
belt latch side (Fig. 14).
The diagonal belt must now be threaded into the diagonal belt guide (B). To do
this, open the hook (O) and place the belt in the diagonal belt guide (B). Please
ensure that the belt does not twist and that it can move through the belt guide
(Fig. 15).
+
connectors (E) and retract them into the
24
+
, proceed as
+
+
), following