Canon Color imageCLASS MF8170c Basic Manual page 77

Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing,"
on p. 5-4.)
Press [B&W Start] or [Color Start].
The machine begins scanning.
NOTE
After printing of the current copy job is complete, the next copy job begins.
If the memory becomes full while scanning, <MEMORY FULL> appears in the LCD.
When the ADF is used for scanning, the document being scanned stops in the ADF.
Follow the procedure in "Removing Jammed Paper from the ADF," on p. 9-20 to clear the
paper jam in the ADF.
All of the scanned documents will be erased if <MEMORY FULL> appears, so divide the
document and copy each part separately, or select a lower image quality mode and
make copies again.
Special Features 5-13
5