Storing Toner Cartridges - Canon Color imageCLASS MF8170c Basic Manual

Canon imageclass mf8170c: basic guide
Hide thumbs Also See for Color imageCLASS MF8170c:
Table of Contents

Advertisement

Do not touch or hold the developing roller. The image quality may deteriorate. Do not
apply shock to the toner cartridge memory or bring it near magnetic waves. It may result
in damage to the machine.
When handling a toner cartridge, hold it properly as shown in the figure. Do not set it
vertically or upside-down.
Never attempt to disassemble or modify the cartridge.
If a toner cartridge is brought to an environment where the temperature differs extremely,
8
condensation may occur both inside and on the outside of the cartridge. If you are going
to install a cartridge that was stored in a cold place in a warm room, leave the cartridge
stored in the protective bag for over two hours in the warm room so that it can adapt to
the ambient temperature.
Be sure to use a new toner cartridge within the expiration date indicated on the package.
Using a genuine Canon toner cartridge is recommended.

Storing Toner Cartridges

Be careful of the following points for storing new cartridges or those that were
removed for maintenance.
IMPORTANT
Do not remove a new toner cartridge from the protective bag until it is ready to be used.
8-14
Replacing the Cartridges
Toner cartridge
memory
Developing roller

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents