Lcd Messages - Canon Color imageCLASS MF8170c Basic Manual

LCD Messages

The following messages are displayed in the LCD when the machine performs a
function or if it encounters an error.
ADJUSTING
WAITING TO SCAN
Cause
Remedy
CHECK CARTRIDGE
Cause
Remedy
CHECK DOCUMENT
9
Cause 1
Remedy
Cause 2
Remedy
9-22 LCD Messages
The machine is not ready for copying because you have just connected the
power cord to the machine.
Wait for a while. The machine cannot scan documents for copying immediately
after the power cord is connected.
A problem has occurred with a toner cartridge.
Reset the machine by opening the cartridge cover and then closing it. If the
message persists, unplug the machine from the power supply and contact
Canon Authorized Service Facilities or the Canon Customer Care Center.
Indicates either "C", "M", "Y", or "K".
There is a paper jam in the ADF.
Remove the document you are trying to copy in the ADF. (See "Removing
Jammed Paper from the ADF," on p. 9-20.)
Make sure that the document is not too long or too short. (See "Document
Requirements," on p.3-1.)
Then reset the machine by opening the front cover and then closing it.
The ADF roller rotates without feeding documents.
Fan the edge that will feed into the machine first, then tap the edge of multiple
page documents on a flat surface to even the stack.