Confirming And Deleting A Fax Job - Canon Color imageCLASS MF8170c Basic Manual

Confirming and Deleting a Fax Job

Follow the procedure below to confirm the sending or receiving status.
Press [Status Monitor].
Press [((-)] or [)(+)] to select <RX/TX STATUS> ➞ press [Set].
NOTE
If there is no job, <NO CURRENT RX/TX JOB> is displayed.
If there is only one fax job, go to step 4.
The transaction number and <TX/RX> in the LCD mean the following:
Press [((-)] or [)(+)] to confirm the transaction number and time.
NOTE
7
For the fax job with multiple destinations (sequential broadcasting), only the fax/
telephone number to be sent first is displayed.
If you want to delete the fax job, press [Set].
NOTE
If you delete the fax job with multiple destinations, the machine does not send the fax to
any of the destinations registered for the job.
If you decide to delete the job, press [((-)] for <YES>.
NOTE
To cancel deleting the job, press [)(+)] for <NO>. Once the job is deleted, the job cannot
be restored.
Press [Stop/Reset] to return to the standby display.
NOTE
For detailed information on all fax features, see the Facsimile Guide.
7-2 Checking the Status of the Jobs Stored in the Machine
- <0001> to <4999>: A sent document (TX)
- <5001> to <9999>: A received document (RX)