To Install Rear Gate Board; Reversible Rear Mat (If Equipped) - Subaru Legacy Outback 2008 Owner's Manual

6-14
Interior equipment
& To install rear gate board
Insert the hooks on the rear gate board
into the holes in the rear gate panel.
Fit the top of the rear gate board into the
groove in the rear gate panel.
Reversible rear mat (if
equipped)
Because the surface of the back side of
the rear mat has a special coating that
makes it easy to remove any dirt that has
accumulated, it is all right to get the rear
mat dirty.
Clear away any items from the cargo area
so that it is easier to take the mat out.
Confirm that there are no people and
obstructions, and lift the mat and take it
out from the cargo area.
Be careful not to drop the rear mat when
putting down the mat.
Place the mat in the cargo area. Then,
return the mat its original location.
CAUTION
. If you place heavy items on the
mat, the handle and hook could